YOU CAN BUILD YOUR OWN BATTERY RECONDITIONING MACHINE FOR LESS THAN 500$ (CDN)

Details on how to order the documents to build your reconditioner are at the end of this page. If you want to go there immediately just CLICK HERE

By the way, the entire documentation and information that you will see on this website, deals with lead and acid batteries. This is the kind of batteries that are used in automobiles, trucks, golf carts, recreational vehicles and in just about every motor vehicle, including boats and/or all-terrain vehicles.

Just a few words to introduce myself. My name is Reg Boulanger. I have been involved in the reconditioning of lead and acid batteries for over 15 years. I founded and operated a business under the trade name of BATTERIES TECH 2000 and reconditioned and sold hundreds of thousands of batteries. About 10 years ago, in part because I found the equipment that I needed too expensive, but mainly because the equipment that I had purchased did not do the job to my satisfaction, I created my own reconditioning machine.

In part, that machine represents the equivalent of a series battery charger, but modified to not only recharge batteries but to recondition them. How?

Surely, you don't really expect me to come out with technical details here. But don't believe all those so called self proclaimed experts on the subject. There are no gigantic technical secrets. To help you understand what battery reconditioning is all about, please give the following information the attention it deserves:

1. Yes, there are millions of batteries being replaced in all sorts of vehicles each and every day. So it is a fact that the supply of batteries to recondition is plentiful. No matter what equipment you use, you could never get to recondition even half of the stock that becomes available each day.
2. It is false to say that any and all batterries can be reconditioned. The promoters who tell you that, don't know what they are talking about or they are lying to you. If you get involved in the field of battery reconditioning, sooner or later, you will realize this. At this time, I can guarantee that you are not making a mistake if you take my word for it.
3. In a percentage that exceeds 50%, the batteries that can be reconditioned, are adversely affected by excess sulphating. This is precisely the problem that is solved by the reconditioner that you will build. This reconditioner corrects and solves this problem, by eliminating sulphating, better than any other machine on the market today.

The question concerning how reconditioning is done was legitimate; the answer is in the above paragraph.

Now, how much do you know about battery reconditioning?

I am not trying to embarrass you or anyhting of the sort. It's just that if you are planning to get involved in battery reconditioning, it would be a very good idea to learn as much as you can on the business of battery reconditioning. There is no doubt that you would gain a lot by reading the Information Manual that we offer on our website. This manual will answer all your questions on battery reconditioning; questions like:

- How, where and at what price to buy and resell your batteries.

- How to select those batteries;

- What guarantees should you offer; at what conditions;

- How to do reconditioning;

- What batteries can be reconditioned;

- What systems and methods are others using;

- What models of batteries should you select.

And a lot more. Clearly, you will need to get that information from someone who knows what he is talking about, before you start operating your business. I have gone through all this hundreds of times. All the answers are in my Information Manual. It contains 90 pages of information.

You can dowload that Information Manual here CLICK HERE

When you decide to go ahead and launch your battery reconditioning business, you have 2 options:

Option 1
If you can afford it from the start, you should buy our BATTERIES TECH 2000 reconditioner. More details on this option in OPTION 1 below.

Option 2
If you're on a limited budget and wish to start more slowly, you can build your own reconditioner. More details on this option in OPTION 2 below.

OPTION 1

If you can afford it, this is by far the best option. It will allow you to be profitable from the very begining. At the price that this machine is being offered, it will pay for itself within the first three weeks of operations. Just do the maths; this machine can recondition 10 batteries a day. Under normal conditions, at least 5 of those batteries will be ready for sale at an average price of 30$ a unit. That's 150$ a day. If you operate 6 days a week, that represents 2700$ after 3 weeks. The machine will pay for itself before the end of the third week. Where else could you get such a return on investment?

You can buy the best battery reconditioning machine on the market for 1895$(Cdn). This machine will recondition 10 batteries at a time. It is very easy to operate and it does a fantastic job. I sincerely think that this is the very best machine available today, and at 1895$, it sells for a lot less than what competitors are asking, for machines that don't even come close to giving the kind of results that the BATTERIES TECH 2000 will give you. Here is a picture of that machine:

Legend

1- Carry handle
2- Power connection
3- Amp meter
4- Volt meter
5- Timer(cumulative usage)
6- Fuse
7- Switch
8- Pilot light
9- Timer (session)
10- Circuit breaker
11- Wire connectors to batteries

I have reconditioned thousands of batteries with this type of reconditioner. It made me ten times more money than any other recondtioner that I purchased for three times the price of the BATTERIES TECH 2000 unit. By the way, this machine was selling for 7,500$ until a few months ago.

If you want to purchase this machine, just send me an e-mail confirming your intention and I will send you a "Request for payment" through the Paypal system of payment. You will then be able to make your payment by Paypal and we will make the necessary arrangements to ship the machine to you. At the same time, when we know where the machine is to be shipped, we will be able to provide the exact cost of shipping and handling. To send us your e-mail CLICK HERE

OPTION 2

In many places in our documentation, we indicate that some of our customers are able to launch their battery reconditioning business with about 1000$. In part, they are able to do this because they build their own reconditioner.

For a fee of $49.00 (U.S.) we can supply to you a complete and detailed plan (photographs and drawings) of the inside and outside of a battery reconditioner, that uses the exact same technology that the unit shown above uses.

Our package includes a list of components and parts, indicating capacities and descriptions, together with instructions on how to proceed to assemble the machine.

That machine uses much less expensive parts and components but it has the exact same mode of operation and will produce the same results. As an example explaining the difference in cost, the red casing used for the 1895$ machine shown above actually costs over 700$. The grey casing used in the "build your own" model that you see below costs less than 20$. This picture was taken two weeks ago. It represents a machine built recently by one of our customers. The timer and the fan grid that you see in that picture are no longer available today. We explain how to replace those parts in the documentation that you will receive when you purchase our plan.

The "build your own" model actually represents the first generation or the initial model of reconditioner that I built and used for many years.

A WORD OF CAUTION

Before publishing the present offer, in order to validate the process that we are suggesting, we proceeded to form a test group. We invited three ordinary individuals and asked them to go through the process of building a reconditioner, with the information presented in our documents. Those persons had to start from scratch, that is find and purchase the parts they would need, assemble the machine, and test it to make sure that it worked as expected.

Two of our test subjects had to visit more than one store to find all the parts they needed. For at least one of our candidates, identifying the parts clearly, in order to know where to purchase them, together with obtaining complete information from the store, appeared to represent the most difficult part of the project.

After they had gathered the necessary parts and tools, all three subjects were able to assemble the machine within one day. One candidate had to obtain additional information from a technician (we had agreed not to supply this service to our candidates).

This initial phase of the project did not include production of the connecting wires needed to join the batteries in a network. Subsequently, these wires were completely fabricated in less than half a day.

We are providing this information, in order to help you realize what degree of difficulty you should expect to encounter in your task.

Remember that our experiments were done with people who had no prior knowledge in the fields of electricity or electronics.

OUR GUARANTEE

Even though our documentation is clear and easy to understand and follow, we realize that some customers may encounter unexpected difficulties. If it is needed, here are the details of the support that we can offer.

FIRST OF ALL, WHAT WE CANNOT GUARANTEE

1. For obvious reasons, we cannot offer a money back guarantee. Such a guarantee necessarily implies that both parties can be placed in the same situation they were in before purchase or payment. This is impossible after you are in possession of the plan.


2. The results that you will obtain with the machine that you build, will depend for the most part, on how you select batteries and how you use the reconditioner. We cannot control or supervise the quality of the work that you will do and obviously, we cannot offer guarantees on the results that you will obtain.

THE SUPPORT THAT WE OFFER

The support that we offer will apply in either of the following situations:

Scenario 1

If you are unable to find the parts that we describe in pages 4, 5, 6, and 7 of the document that we supply, we can ship them to you. We do our best to avoid this, because of the very high costs of handling and shipping involved.

If you decide to avail yourself of this part of our support offer, you must inform us of your intention by e-mail. Your message must indicate exactly what parts you are unable to find locally.

You, the customer, must assume all charges, including the purchase price of parts, plus handling and shipping charges.

Scenario 2

After you have purchased all parts, in the unlikely event that you are unable to assemble the machine, we can proceed to do the assembling for you.

If you decide to avail yourself of this part of our support offer, you must inform us of your decision by e-mail. Upon receipt of your request, we will promptly inform you of the address where you can send us all the parts that you have purchased.

Upon receipt of the parts, we will proceed to assemble the machine for you.

We will charge a fee of 150$ to assemble your machine.

In addition, all purchases of replacement parts if necessary, handling and shipping charges both ways, will be assumed by you.

To order the plans and documents to build your reconditioner, just click the Buy Now button and complete the payment procedure. As soon as your payment is authorized, you will be directed to the page where you can download the entire documentation.

If you have any difficulties either completing payment or downloading the document, please contact us by e-mail, for this CLICK HERE

To return to any section or page of the site, simply click one of the links conveniently located on the left hand side or the bottom of the page.

© Copyright - all rights reserved